Cold and Hot Shock Test Chamber
● Inner diameter can be customized as required by the client.
● Unique lever lock.
● Observation window can be added.
● Lead holes are available on both sides.
● Use of 2-phase method shortens the temperature recovery time of the sample.
● Up and down movement method of test basket; It is driven by cylinder steadily.
- specifications
- Refrigeration system
- Control system
- configuration
- accessories
| 型號Model | TⅡ100-40W | TⅡ200-40W | TⅡ300-40W | TⅡ100-55W | TⅡ200-55W | TⅡ300-55W | TⅡ100-65W | TⅡ200-65W | TⅡ300-65W | ||
| 內容積(L)Internal Volume (L) | 100 | 200 | 300 | 100 | 200 | 300 | 100 | 200 | 300 | ||
| 內箱尺寸(mm) Inner Dimension (mm) | W | 650 | 650 | 970 | 650 | 650 | 970 | 650 | 650 | 970 | |
| H | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 | ||
| D | 370 | 670 | 670 | 370 | 670 | 670 | 370 | 670 | 670 | ||
| 外箱尺寸(mm) Outer Dimension (mm) | W | 1660 | 1660 | 1980 | 1660 | 1660 | 1980 | 1660 | 1660 | 1980 | |
| H | 2050 | 2050 | 2050 | 2050 | 2050 | 2050 | 2050 | 2050 | 2050 | ||
| D | 2100 | 2400 | 2400 | 2100 | 2400 | 2400 | 2100 | 2400 | 2400 | ||
| 試樣最大重量(kg)Maximum Sample Weight (kg) | 7.8 | 7.8 | 7.8 | 7.8 | 7.8 | 7.8 | 7.8 | 7.8 | 7.8 | ||
| 試驗方法Testing Method | 試樣區吊籃提升或下降 Hanging basket of the sample zone goes up or down | ||||||||||
| 預熱預冷溫度Preheating and Pre-cooling Temperature | 預熱：(60～185)℃ 預冷：(-80～5)℃ Preheating: (60～185)℃ Pre-cooling: (-80～5)℃ | ||||||||||
| 溫度恢復a/切換時間 Temperature Recovery a/Switch Time | 恢復時間：2～5min 切換時間：≤10s Recovery time: 2～5min Switch time: ≤10s | ||||||||||
| 溫度偏差(℃)Temperature Deviation (℃) | ±2.0℃ | ||||||||||
| 暴露時間Exposure Time | 高溫暴露：30min 低溫暴露：30min High-temperature exposure: 30min Low-temperature exposure: 30min | ||||||||||
| 重量(kg)Weight (kg) | 1090 | 1480 | 1550 | 2000 | 1100 | 1510 | 1580 | 1170 | 1590 | ||
| 最大電流(A)Maximum Current (A) | 46 | 60 | 65 | 110 | 51 | 65 | 65 | 58 | 96 | ||
| 電源功率(kW)Power (kW) | 30 | 37 | 40 | 76 | 32 | 40 | 40 | 37 | 60 | ||
| 冷卻水流量(t/h)Circulating Cooling Water (t/h) | 5 | 8 | 8 | 15 | 5 | 10 | 10 | 9 | 13 | ||
| 材料Material | 內箱Inner Chamber | 不銹鋼板 SUS304Stainless steel sheet SS304 | |||||||||
| 外箱Outer Chamber | 雙面鍍鋅鋼板，表面處理后靜電噴塑處理 Two-sided galvanved plafe- with the surface treated by electrostatic powder coating | ||||||||||
| 保溫Thermal Insulation | 纖維高溫棉+聚氨脂發泡 High-temperature Glass wool/Rockwool & PU foam | ||||||||||
| 執行器Actuator | 高溫槽High-temperature Tank | 加熱器：進口鎳鉻合金發熱絲 Heater: nickel-chrome electric heater wire | |||||||||
| 高溫沖擊風機，預熱時用軸流風機 High-temperature shock fan; axial flow fan for preheating | |||||||||||
| 低溫槽Low-temperature Tank | 加熱器:進口鎳絡合金發熱絲 蓄冷器：片式鋁 板Heater: nickel-chrome electric heater wire; regenerator: slice aluminum plate | ||||||||||
| 風機：耐低溫風機 Fan: Low-temperature resistance fan | |||||||||||
| 風門驅動Damper Driver | 氣動氣缸：試樣區吊籃上下移動用 Pneumatic cylinder: For driving the cylinder to move up and down | ||||||||||
| 氣源供應 Air supply | |||||||||||
| 制冷系統Refrigeration System | 制冷方式：活塞式壓縮機+二元復疊式制冷 Refrigeration mode: Low-noise piston type compressor & binary cascade refrigeration | ||||||||||
| 冷媒：環保制冷劑R404A，R23 Refrigerant: Environmental protection refrigerant R404A, R23 | |||||||||||
| 控制器系統 Controller System | 觸摸屏+PLCTouch Screen & PLC | 7.0"或10.0"， 800×480分辨率，混合輸出PLC 7.0" or 10.0", 800×480 resolution, mixed output PLC | |||||||||
| 運行方式Running Mode | 程式運行 Program mode | ||||||||||
| 設定方式Setting Mode | 簡體中文+英文,觸摸輸入 Simplified Chinese & English, input by touch | ||||||||||
| 程序容量Program Capacity | 269組程序，每組程序3段，可設32000次循環，程序具有鏈接功能269 groups of programs, each consisting of 3 sections for setting 32000 times of cycles. The program has link function. | ||||||||||
| 設定范圍Setting Range | 根據設備性能的最大范圍調整±5.0℃ Adjusted by ±5.0℃ according to the according to the maximum range of the equipment | ||||||||||
| 顯示分辨率Display Resolution | 溫度：0.1℃，時間：s Temperature: 0.1℃; time: s | ||||||||||
| 傳感器Sensor | PT100(鉑電阻) PT100 (platinum resistor) | ||||||||||
| 控制方式Control Mode | 低溫冷平衡+抗積分飽和PID+自整定 Low-temperature cold balance & anti-integral saturation PID & auto-tuning | ||||||||||
| 曲線記錄Curve Record | 具有帶電保存數據功能，屏上可以滑動瀏覽數據，抓圖功能 With automatic data storage function. User can browse the data by sliding on the screen; screen shot function is available. | ||||||||||
| 附加功能Additional Function | 報警會彈出報警原因處理方法，定時開關機，斷電保護，用戶權限功能 Fault alarm, cause and handling method: Timed startup/stop; power failure protection, user permission function | ||||||||||
| 通訊功能Communication Function | 支持RS485，LAN(網口)，GPRS(手機)等方式通訊，方便遠程監控，數據采集：IBM PC兼容機，PⅡ以上CPU，128M以上內存，簡體中文版操作系統 Support RS485, LAN (internet port), GPRS (phone) and other communication modes, which enable users to conduct remote monitoring simply. Data acquisition: IBM PC compatible machine. CPU above PII, memory above 128M, operating system in Simplified Chinese / English. | ||||||||||
| 數據采集Data Acquisition | 1.配備USB接口，可保存3個月的曲線數據，可下載歷史曲線，歷史數據； 2.可代替記錄儀，內置超大存儲空間，連續24小時開機可保存3個月的數據，采樣時間為1分鐘，可替代電腦存儲用，戶可用U盤導出歷史數據(時間可選)，生成CSV格式文件；3.接PC機（選購）——通過電腦監控軟件記錄試驗數據，可顯示曲線，PC機可作為遠程終端，實現遠程監控。 1. With USB interface, curve data of three months can be saved, and historical curve and test data can be downloaded. 2. It can be an alternative to the recorder. With built-in extra memory, 3 months of data under the condition that the machine runs for 24 hours continuously can be saved. The sampling time is 1min. It can replace computer storage. Users can export historical data through USB disk (time is optional) and generate files in the format of CSV. 3. Connect to PC (optional) - Record testing data through computer monitoring software. It can display the curve. PC can be used as remote terminal to realize remote monitoring. | ||||||||||
| 壓縮空氣Compressed Air | 壓力：0.5～0.7MPa 流量：0.1m3/min Pressure: 0.5～0.7MPa Flow: 0.1m3/min | ||||||||||
| 冷卻水Circulating Cooling Water | 供水水壓：0.25～0.4MPa 水溫：≤30℃ Water pressure: 0.25～0.4MPa Water temperature: ≤30℃ | ||||||||||
| 電源(V)/(Hz)Power Supply (V)/(Hz) | 交流電壓380V±38V 頻率50Hz±0.5Hz 三相四線+接地保護 AC voltage 380V±38V Frequency 50Hz±0.5Hz 3-phase 4-wire & earthing protection | ||||||||||
| 標準配置Standard Configuration | φ50測試孔1個，樣品架1套，腳輪4個 1Testing hole of Φ50; 1 sets of sample holders; 4 casters | ||||||||||
| 安全裝置Safety Device | 漏電開關，電機，壓縮機，相序，超溫等保護功能 Leakage switch, motor, compressor, phase sequence, over-temperature protection, dry-burn protection, etc. | ||||||||||
| a 恢復條件：室溫為+25℃,試樣為塑料封裝集成電路（均勻分布）。 注：沖擊系列試驗箱可依據客戶需求定制。 a Recovery condition: Room temperature +25℃ The sample is plastic encapsulated integrated circuit (uniformly distributed). Note: Shock series test chamber can be customized according to client’s requirements. | |||||||||||
●Adopt imported components & parts from famous internal brands
●Adopt R404A and R23 refrigerant with the ozone depletion factor of 0
●All condensers are installed with filtration device, which ensures long-term reliable operation of the unit.
●Intelligent control of refrigeration system applies to large range of load and the running power is lower.
●Imported compressor: Copeland, Bock or Bizter, low in noise, stable in operation and powerful in performance.
●Before welding, all pipelines shall be charged with nitrogen to protect the interior of the copper part from oxidation. The weld junction is sprayed with varnish for protection. The company is one of the manufactures up to this standard.
●Refrigeration unit adopts modular production, including sub-assembly, part assembly and general assembly; set up the elbow manual guarantees the uniformity of the system; standardized modules are convenient to install, debug and maintain.
● Inner diameter can be customized as required by the client.
● Unique lever lock.
● Observation window can be added.
● Lead holes are available on both sides.
● Use of 2-phase method shortens the temperature recovery time of the sample.
● Up and down movement method of test basket; It is driven by cylinder steadily.
Topect touch-type temperature and humidity controller is specially developed by Topect for the industry of environmental equipment; it consists of touch screen, PLC, temperature module and humidity module, powerful in functions. The touch screen is equipped with visual editing software, PLC logic programme, extensible I&O port and extensible multi-point temperature; USB interface allows users to export data (time optional). Remote monitoring is realized through RS485 communication and PC connection.
●The controllers are developed independently by our company with high performance. Characterized by 65536 color 7’’, TFT true-color touch screen and 800×480 dot matrix, it ensures realistic effects and comfortable operation. In addition, the entire interface is concise and clear, convenient and reliable.
●Our controllers have powerful debugging protection function, fault alarm and troubleshooting description; extensible I&O port can be used to prepare different control programs according to requirement to realize different functions; they can be developed separately according to actual environment but can be controlled by computer intensively through software. The controller interface adopts consistent style, convenient for users’ operation.
●With PLC program control, this system has timed running & stop function and power failure protection function as well as better stability.
●It can be connected to a centralized monitoring software and supports communication protocol, convenient for users’ secondary development; multiple test chambers can be monitored remotely.
●Temperature recorder.
●Communication port and software for remote control and data transmission.
●Observation window.
●Lead holes of different specifications(φ50, φ80, φ100, φ160, etc,) are optional.
●Super long defrosting time.
●Movable temperature sensor.
●Customize the sample cart according to users’ needs.
●Non-standard customized equipment can meet users’ demands.
